According to experts, a water heater should be installed at a height of at least 1.8 meters or 6 feet above the ground. As the water pressure increases and you get hot water.
Collect the water while draining the water heater and you can see that it will be full of sediment. If the water heater is not drained on time, sediment will build up and could cause serious problems.
Checking your pressure relief valve or thermostatic mixer for clogging could help you figure out if there is a problem with your water heater or not. You can check your blood pressure once a year to prevent further damage.
It is necessary to check the temperature of the water from time to time. The hot water temperature should be 125 degrees or less, it should not go beyond.
You need to look closely and make sure the connections are secure and there are no leaks in the water heater. Also, if there is any rust or corrosion, be sure to get it repaired as this could create problems in the future.
If your water heater is more than 10 years old you should choose a new one as the 10-year-old unit can never compare with current technology so you should buy a new one as it will work much more efficiently.
One has to check the insulation around the unit after every few months. It is necessary to cover the water heater with insulation, especially if the unit is older. Not only will it lower your electricity bill, but it will also keep the water hot since the unit doesn't have to run much.
Make sure the water heater is connected to an MCB, which is a miniature circuit breaker that trips if the power supply is unstable.
Be sure to get yearly exams and routine maintenance for your heater to avoid a major issue. If the problem is caught early on, it can be easily fixed.
Lowering the temperature will not only save electricity but also increase the life of the geyser as the lower temperature will reach the desired temperature faster. In addition to this, hot water will reduce the chances of accidental burns instead of hot water.
If any of these 10 Tips occur, contact a professional water heater technician. Trying to manage repairs yourself can incur unnecessary costs if something goes wrong.